Saturday, March 19, 2022

Plastic End Cap/Plug for Square Pipe/Tube 25x25mm ::

Square plugs feature a series of externally tapered ribs designed to accommodate a wide range of tubing gauges while also satisfying the fit adjustments on tubing with inside dimensional fluctuations.

  • ·     Exterior ribs are designed to provide a sure grip inside the tube
  • ·     Rib design prevents unsightly plastic shavings found on many straight wall glide installations
  • ·    Thick base is impact and abrasion resistant
  • ·    Durable construction and excellent gliding edges
  •       Will not rust or corrode

Features:

  • ·         Low construction cost;
  • ·         Corrosion resistance;
  • ·         Good insulator;
  • ·         No disagreeable odor;
  • ·         Durable and waterproof;
  • ·         Good quality and light weight;
  • ·         Convenient to install and dismental;

 Product Information : 

SQUARE, ROUND, PLUG, THREAD, CAP, PA6, RED, BLACK, NYLON, LLDPE, HDPE, PP, TUBE, PIPE, 

External Diameter: 25.00mm ± 0.2MM 

Internal Diameter: 21.50mm ± 0.2MM 
Colour: Natural / White / Black / Green/ Red
Quantity: 500 & 1000 Nos. 
Material: PA6/ PPCP / HDPE/ LDPE/ PVC 
Collar Thickness: 2.0mm ± 0.1MM 

PART CODE :: 20021811

 NBR Rubber Washer Flat 3/4", OD26.0 x ID15.5 x TH3.0mm :: 

Nitrile rubber washers provide excellent sealing against Petro-chemicals, greases and oils. Nitrile rubber is predominately used within the automotive and industrial sector. Due to our material slitting capabilities, we can offer our customers a range of nitrile rubber washer thicknesses. Nitrile rubber washers are mainly used to act as a watertight seal that is in contact with oil and Petro-chemicals. Nitrile rubber also provides good resistance to abrasion, whilst providing moderate tensile strength.

Features:

·         Easy to use
·         Good Sealing Properties (Air, Dust & Water Migration)
·         Excellent Chemical Resistance
·         Excellent Oil Resistance
·         Good Tensile Strength

Product Information : 


SPACER, BUSH, ROUND, WASHER, NBR, SBR, EPDM, NITRILE, NATURAL, NEOPRENE, VITON, SILICON, FLEXIBLE, SOFT, HARD, RING, FLAT, GASKET 

Internal Diameter: 15.5mm ± 0.2MM 
External Diameter: 26.0mm ± 0.2MM 
Colour: Natural / White / Black / Green/ Red
Quantity: 500 & 1000 Nos. 
Material: NBR, SBR, EPDM, NITRILE, NATURAL, NEOPRENE, VITON & SILICON 
Thickness: 3.0mm ± 0.1MM 
Hardness: 30~90 Shore A

PART CODE :: 20021445

Plastic Thread Plug For NPT 3/8" :: 

Plastic Hex Socket Plugs are designed for use on NPT threads and fittings. The Socket design allows for threads to be protected during low-pressure testing and in-house processing or handling; however these are not intended for permanent applications.

Protects threaded components from moisture, dust and damage during production, shipping and storage, and can also be used as masking during painting and plating. The Threaded Plugs are molded in different plastics and sized to fit NPT threads for 3/8".

Features:

  • ·         Easy to use
  • ·         High Efficiency
  • ·         Precisely designed
  • ·         Optimum strength
  • ·         Durable

Product Information : 

SPACER, BUSH, ROUND, PLUG, THREAD, PA6, RED, BLACK, NYLON, NPT, BSP, HEX, SOCKET 

External Diameter: 16.50mm ± 0.1MM 
Colour: Natural / White / Black / Green/ Red
Quantity: 500 & 1000 Nos. 
Material: PA6/ PPCP / HDPE/ PA66 
Thickness: 15.0mm ± 0.2MM

PART CODE :: 20021788


Plastic Thread Plug For NPT 1/2" :: 

Plastic Hex Socket Plugs are designed for use on NPT threads and fittings. The Socket design allows for threads to be protected during low-pressure testing and in-house processing or handling; however these are not intended for permanent applications.

Protects threaded components from moisture, dust and damage during production, shipping and storage, and can also be used as masking during painting and plating. The Threaded Plugs are molded in different plastics and sized to fit NPT threads for ½”

Features:

  • ·         Easy to use
  • ·         High Efficiency
  • ·         Precisely designed
  • ·         Optimum strength
  • ·         Durable

Product Information : 

SPACER, BUSH, ROUND, PLUG, THREAD, PA6, RED, BLACK, NYLON, NPT, BSP, HEX, SOCKET 

External Diameter: 21.90mm ± 0.1MM 
Colour: Natural / White / Black / Green/ Red
Quantity: 500 & 1000 Nos. 
Material: PA6/ PPCP / HDPE/ PA66 
Thickness: 15.0mm ± 0.2MM

PART CODE :: 20021789


 
SILICON WASHER OD77.0 x ID66.0 x T6.00mm ::

Silicone washers can withstand extreme temperatures (both hot and cold). This includes dry or humid climates. In addition, they operate with low compression sets and resist elements such as UV light and fungus.

Rubber washer uses especially benefit plumbing, heating, ventilation, and air conditioning systems, as well as pools, boats, and other aquatic products that come into extensive contact with water. They also insulate against electric charges in electronic and thermal applications. Additionally, rubber washers absorb shock, making them great for use as rubber spacers in machinery with frequently moving parts. No matter the application, rubber washers’ nonabrasive qualities ensure scratch-free products throughout their lifetime.

Features:
  • Robustness
  • High Efficiency
  • Precisely designed
  • Optimum strength
  • Durable
Product Information : 
ROUND, WASHER, NBR, SBR, EPDM, NITRILE, NATURAL, NEOPRENE, VITON, SILICON, FLEXIBLE, SOFT, HARD, RING, FLANGE, FLAT

Internal Diameter: 66.0mm ± 0.3MM 
External Diameter: 77.00mm ± 0.3MM 
Colour: Natural / White / Black / Green/ Red
Quantity: 500 & 1000 Nos. 
Material: NBR, SBR, EPDM, NITRILE, NATURAL, NEOPRENE, VITON & SILICON 
Thickness: 6.0mm ± 0.2MM 
Hardness: 30~90 Shore A

PART CODE :: 20021213


Plastic Thread Plug For NPT 1/4" :: 

Plastic Hex Socket Plugs are designed for use on NPT threads and fittings. The Socket design allows for threads to be protected during low-pressure testing and in-house processing or handling; however these are not intended for permanent applications.

Protects threaded components from moisture, dust and damage during production, shipping and storage, and can also be used as masking during painting and plating. The Threaded Plugs are molded in different plastics and sized to fit NPT threads for ¼”.

Features:

  • ·         Easy to use
  • ·         High Efficiency
  • ·         Precisely designed
  • ·         Optimum strength
  • ·         Durable

Product Information : 

SPACER, BUSH, ROUND, PLUG, THREAD, PA6, RED, BLACK, NYLON, NPT, BSP, HEX, SOCKET 

External Diameter: 13.00mm ± 0.1MM 
Colour: Natural / White / Black / Green/ Red
Quantity: 500 & 1000 Nos. 
Material: PA6/ PPCP / HDPE/ PA66 
Thickness: 10.0mm ± 0.2MM

PART CODE :: 20021787